Description
The Fusion S3 fits where most soundbars do not
It’s a Sunday afternoon and, as usual, the game is on.
Your family is settled in on the sofa, watching their brand new mammoth TV screen.
It takes up half the wall, but they are happy.
That is until…
“Seriously?”
“What’s the matter? Did the other team score?”
“No, it’s this TV!”
“The TV? We spent two month’s rent on that thing!”
“I know, but the sound is HORRIBLE!”
“Well that’s because the screen is so ridiculously big, there was no room left for speakers.”
Yes- You used up all your wall space on a TV big enough to see your favorite ball players sweat, but now have no
room left for speakers.
Fear not!
This is no ordinary soundbar!
The Fusion S3 slim passive soundbar by NextLevel Acoustics is less than three inches tall and still delivers
high-end performance in a compact and artistic package.
With three channels, powerful 2.5″ drivers, and a textured front surface that minimizes high-frequency reflections,
the Fusion S3 is in a class of its own.
It is also offered in a variety of custom widths – from the ultra-short (49” displays) through the ultra-large (100”
displays) – to fit any screen or décor. So even if your set is over the fireplace, the sound will be “on-fire”!
Let’s get custom
If you want to further customize, the Fusion S3 may be purchased as either a 2-channel stereo or full LCR
(Left-Center-Right) soundbar and comes in an assortment of colors and finishes including our standard high-gloss
black. Want to mount your Fusion S3 flush to the bottom of the display but you have one of those IR badges sticking
down from the bottom of the TV? No Problem – we offer the option for a custom IR badge notch in the speaker grille
tailored specifically to the make and model of your display. The grille will now perfectly wrap around that pesky IR
badge so that you can achieve a truly streamlined and flush installation. All of these options are beautiful to both
the eyes and ears.
FEATURES
- 2.95″ of overall height
- Ported design
- Extraordinary acoustical dynamics and clarity
- Proprietary crossover configuration
- Textured front surface minimizes High-Frequency reflections
- Elite tapered ends
- Baltic Birch back panel
- Z-clip (wall) or UM1 mount (to display)
- Custom configurations (Stereo vs. LCR vs. Center), widths, IR badge grille notches, finishes, grille fabrics, and colors available
| SPECS DESCRIPTION | SPECS |
| System Design | LCR Soundbar – Tapered Ends |
| Enclosure | Ported |
| Woofer | (3) 2.5″ Long Throw w/ 1″ VC |
| Tweeter | (3) 1″ Soft Dome |
| Recommended Amp Power | 150 W continuous |
| Frequency Response / Max SPL | 80 Hz +/- 20 kHz / 105 Db |
| Crossover | 3 kHz at 12 Db |
| Impedance | 4 ohms per sector |
| Sensitivity (db 1 watt/1 meter) | 88 |
| Mount | Z-Clip (wall) or UM1 (direct to display) |
| Dimensions | custom” L x 2.95” H x 3″ D |
| Standard Finish | High Gloss Black / Matte Black |
| SPECS DESCRIPTION | SPECS |
| System Design | LCR Soundbar – Tapered Ends |
| Enclosure | Ported |
| Woofer | (6) 2.5″ Long Throw w/ 1″ VC |
| Tweeter | (3) 1″ Soft Dome |
| Recommended Amp Power | 30-300 W |
| Frequency Response / Max SPL | 70 Hz +/- 20 kHz / 105 Db |
| Crossover | 3 kHz at 12 Db |
| Impedance | 8 ohms per sector |
| Sensitivity (db 1 watt/1 meter) | 88 |
| Mount | Z-Clip (wall) or UM1 (direct to display) |
| Dimensions | custom” L x 2.95” H x 3″ D |
| Standard Finish | High Gloss Black |
| SPECS DESCRIPTION | SPECS |
| System Design | LCR Soundbar – Tapered Ends |
| Enclosure | Ported |
| Woofer | (6) 2.5″ Long Throw w/ 1″ VC |
| Tweeter | (3) 1″ Soft Dome |
| Recommended Amp Power | 30-300 W |
| Frequency Response / Max SPL | 70 Hz +/- 20 kHz / 105 Db |
| Crossover | 3 kHz at 12 Db |
| Impedance | 8 ohms per sector |
| Sensitivity (db 1 watt/1 meter) | 88 |
| Mount | Z-Clip (wall) or UM1 (direct to display) |
| Dimensions | custom” L x 2.95” H x 3″ D |
| Standard Finish | High Gloss Black |
| SPECS DESCRIPTION | SPECS |
| System Design | LCR Soundbar – Tapered Ends |
| Enclosure | Ported |
| Woofer | (6) 2.5″ Long Throw w/ 1″ VC |
| Tweeter | (3) 1″ Soft Dome |
| Recommended Amp Power | 30-300 W |
| Frequency Response / Max SPL | 70 Hz +/- 20 kHz / 105 Db |
| Crossover | 3 kHz at 12 Db |
| Impedance | 8 ohms per sector |
| Sensitivity (db 1 watt/1 meter) | 88 |
| Mount | Z-Clip (wall) or UM1 (direct to display) |
| Dimensions | custom” L x 2.95” H x 3″ D |
| Standard Finish | High Gloss Black |
1. Please keep your boxes and inner packaging materials. In the event that your speakers need to be serviced at the factory it is essential they are returned in their original packaging.
2. If wall mounting the LCR, install rubber bumpers and Z Clips. Z Clips mount “tab down” (screws on the top) and “tab up” (screws on the bottom) on the wall. Do not mount the Z Clips where the non-safe zones are indicated on the back of the unit.
3. Install hookup wires. Observe polarity to and from the receiver amplifier to the speaker. (+) Side of the peaker must connect to the (+) side of the amplifier. I.e. red to + and black to (-). Place either directly above or below the display.
4. Make sure you adhere to the UM-1 bracket weight restrictions if using
5. Break-in normally takes about 12 hours of playing. In this 12 hours, the crossover capacitors and drive units are breaking in. Please do not play at excessive power levels. Over-driving the speaker system can result in permanent damage. Always turn down the volume when changing between program sources.
