Description
FEATURES
Features include:
- High-gloss piano black / Matte Black / Red Oak / Walnut / Natural Cherry
- Delivers outstanding dynamics and wide far-field coverage with exceptional power handling
- High-performance 5.5″ drivers with 1″ tweeters
- Available in LCR and Stereo configurations
- A removable magnetic grille is partially inset for additional structural integrity
- Wide variety of standard and custom grille fabric options
- Cable management openings on the ends of the wall returns
- MDF construction
| SPECS DESCRIPTION | SPECS |
| System Design | Custom Mantel w/ Integrated Audio Soundbar |
| Configuration | TWW, WTW, WWT (up to 66″ long)
WTW, WTW, WTW (67″+ long) |
| Woofer | (4) 5.5” CWC (Stereo) / (6) 5.5″ CWC LCR |
| Tweeter | (2) DX (Stereo) / (3) DX (LCR) |
| Recommended Amp Power | 40-400 W |
| Frequency Response | 55 Hz – 20 kHz |
| Max SPL | 110 dB @1m |
| Impedance | 4 ohms |
| Sensitivity (db 1 watt/1 meter) | 92 dB at 1 W- 1 M |
| Dimensions | custom” L x 7″ H x 4.2″ d (center) + 3″ – 5″ (on the wall return) |
| Weight | Varies (call for approximate weight) |
| Standard Finish | High Gloss Black, Matte Black |
- Remove the front grille
- Determine the desired location of your Mantelbar
- Run the speaker wire to the terminal cups located on the return ends of the Mantelbar
- Using the pass-through holes on the front of the baffle, level and secure the Mantelbar to the facade of the fireplace using the correct hardware (e.g., toggle bolts, concrete anchors..).
- Replace the grille
Installer acknowledges that the Mantelbar and/or soundbar installed within it may be used near a fireplace or other heat source and do not include special heat-resistant materials or thermal protection. Heat exposure may damage the Mantelbar, the soundbar, or both, and such damage is not covered by warranty. Installer is solely responsible for proper clearances, ventilation, heat management, and compliance with all applicable codes and fireplace manufacturer requirements. Installer assumes all risk associated with installation near a heat source, and Manufacturer shall not be liable for any resulting damage, malfunction, safety issue, or loss.
