Description
FEATURES
- Premium Conference Room Camera Soundbar
- Designer Drivers
- Far field output tweeters
- Extended field of view angled camera bay
- Extraordinary dialog intelligibility
- Proprietary crossover design
- Available in various designer grille fabrics and finishes (upon request)
- PTZ 6.5 (75″ Displays and greater) / PTZ 5.5 (65″ Displays and greater)
| SPECS DESCRIPTION | SPECS |
| System Design | Stereo PTZ Camera Soundbar (75″ Displays+) |
| Enclosure | Ported |
| Woofer | (4) 6.5″ CWC |
| Tweeter | (2) 1″ DX |
| Recommended Amp Power | 30-500 W |
| Frequency Response | 45 Hz – 20 kHz |
| Crossover | Proprietary |
| Impedance | 4 ohms |
| Sensitivity (db 1 watt/1 meter) | 92 |
| Mount | On-wall |
| Dimensions | 9.2″ H x 8″ D x Custom L |
| Finishes | Standard Black or choose from various designer grilles and upgraded finishes) |
| SPECS DESCRIPTION | SPECS |
| System Design | Stereo PTZ Camera Soundbar (65″ Displays+) |
| Enclosure | Ported |
| Woofer | (4) 5.5″ CWC |
| Tweeter | (2) 1″ DX |
| Recommended Amp Power | 30-500 W |
| Frequency Response | 50 Hz – 20 kHz |
| Crossover | Proprietary |
| Impedance | 4 ohms |
| Sensitivity (db 1 watt/1 meter) | 90 |
| Mount | On-wall |
| Dimensions | 7.5″ H x 7.5″ D x Custom L |
| Finishes |
Standard Black or choose from various designer grilles and upgraded finishes) |
1. Please keep your boxes and inner packaging materials. In the event that your speakers need to be serviced at the factory it is essential they are returned in their original packaging.
2. If wall mounting the LCR, install rubber bumpers and Z Clips. Z Clips mount “tab down” (screws on the top) and “tab up” (screws on the bottom) on the wall.
3. Install hookup wires. Observe polarity to and from the receiver amplifier to the speaker. (+) Side of the Speaker must connect to the (+) side of the amplifier. I.e. red to + and black to (-). Place either directly above or below the display.
4. Make sure you adhere to the UM-1 bracket weight restrictions if using
5. Break-in normally takes about 12 hours of playing. In this 12 hours, the crossover capacitors and drive units are breaking in. Please do not play at excessive power levels. Over-driving the speaker system can result in permanent damage. Always turn down the volume when changing between program sources.
