Description
FEATURES
- Dedicated side and rear channel speaker for high-end 5.1 and 7.1 theater applications
- A proprietary cast wool/carbon Quiet Cone™ 6” with (3) 1” neodym silk dome tweeters
- Wide dispersion and exceptional rear/side field characteristics
- Rugged 3/4” wide aluminum mounting frame is fastened to a massive ¾” thick MDF baffle with acoustic back box
- This unit comes fully back boxed, made of MDF, to ensure that whatever is in your wall has zero effect on its performance
- Choose from a wide variety of standard and custom grille fabrics, as well as configurations (e.g., in-wall, on-wall)
| SPECS DESCRIPTION | SPECS |
| System Design | TWO-WAY 6″ dedicated surround in-wall system |
| Enclosure | Sealed |
| Woofer | 6″ Carbon Wool, Long Throw 1.5″ vc |
| Tweeter | (3) 1″ textile dome |
| Recommended Amp Power | 40-400 W max |
| Frequency Response | 57 Hz – 18 kHz |
| Anechoic Frequency Response | 57 Hz – 16 Khz +- 3 db |
| Impedance | 4 ohms |
| Sensitivity (db 1 watt/1 meter) | 89 |
| Hole Cut Out | 8.25″ x 14.75″ x 5″d |
| Overall Size | 8 15/16″ x 15.5″ |
| Standard Finish | Black Pro Duratex |
Next Level preconstruction brackets come with (2) grooves cut into the outside edge of the front face with mounting hardware and perforated metal securing plates. Please follow the below steps:
- Lay the preconstruction bracket on its back with the grooves facing upward
- Using the small silver #6 screws (supplied), install a single perforated metal plate into each of the (2) grooves using the 2 screws
- Move the assembly with the plates attached to the desired location on the wall and secure to the studs (front facing outward) using the 1” wood screws (provided)
- Drywall over the assembly and router out the inner section of drywall to where the preconstruction bracket starts exposing the opening for the speaker
