Description
FEATURES
- Premium grade in-wall speaker system
- Dual 5.5″ Carbon Wool Drivers
- DX Tweeter
- Fully enclosed MDF back box to ensure that whatever is in your wall has zero effect on its performance
- Rail mounting system
- Supports 2×4 construction
- Choose from a wide variety of standard and custom grille fabrics
| SPECS DESCRIPTION | SPECS |
| System Design | TWO-WAY Dual 5.5” audiophile grade in-wall system |
| Enclosure | Sealed |
| Woofer | (2) 5.5” Wool/Carbon Quite Cone™ |
| Tweeter | (1) DX |
| Recommended Amp Power | 40-400 W |
| Frequency Response | 55 Hz – 20 kHz |
| Max SPL | 110 dB @1m |
| Impedance | 4 ohms |
| Sensitivity (db 1 watt/1 meter) | 92 |
| Hole Cut Out | 9.4″ x 19.5″ (in-wall) |
| Overall Size | 10.4″ x 20.5″ (in-wall) / Call for on-wall specs |
| Standard Finish | Satin Black |
Next Level preconstruction brackets come with (2) grooves cut into the outside edge of the front face with mounting hardware and perforated metal securing plates. Please follow the below steps:
- Lay the preconstruction bracket on its back with the grooves facing upward
- Using the small silver #6 screws (supplied), install a single perforated metal plate into each of the (2) grooves using the 2 screws
- Move the assembly with the plates attached to the desired location on the wall and secure to the studs (front facing outward) using the 1” wood screws (provided)
- Drywall over the assembly and router out the inner section of drywall to where the preconstruction bracket starts exposing the opening for the speaker
