Fusion Flat Lux -Plat
With today’s 4k displays continuing to push the boundaries on size and depth, delivering an ultra-thin soundbar that can complement larger displays has always been a challenge for the industry until now. At only 2.38″ of depth and 6.50″ of height, the Fusion Flat Lux, featuring premium 5.25″ drivers and performance grade tweeters delivers stunning aesthetics with a premium performance-based audio solution. Leveraging the same technology as in the Fusion Frame, no longer will you have to compromise form for function.
The Fusion Flat Lux, constructed to the exact width of your display with optional IR badge grille notches (free of charge), can either be mounted flush to the wall or directly to the display using our proprietary UM1 bracket.
Custom configurations (Stereo vs. LCR vs. Center), widths, IR badge grille notches, finishes, grille fabrics, and colors available.
The Fusion Flat Lux incorporates a radical approach to internal air load management and driver construction. Our high-output 5.25″ premium driver exhibits high acceleration and excursion, with ultra-low distortion. Simply put, where our competition has failed, Next Level Acoustics outperforms. The Fusion Flat Lux delivers premium audio dynamics featuring a smooth linear midrange at only 2.38″ deep.
- Extraordinary acoustical dynamics and clarity
- Proprietary crossover configuration
- Low profile at 2.38″ depth
- Flush wall pass-through mounting system / UM-1 bracket mounting system
- Custom width sizes w/ optional IR badge grille notches
- Available in Black Plex or High Gloss Black standard finishes, or choose from our premium finishes and designer grille fabrics
| SPECS DESCRIPTION | SPECS |
| System Design | LCR soundbar
WTW, WTW, WTW (85″+ displays) TW WTW WT (75″ displays) TW WT WT (65″ displays) |
| Enclosure | Sealed |
| Woofer | (6) 5.25″ (85″+ displays)
(4) 5.25″ (65″ and 75″ displays) |
| Tweeter | (3) 1″ Dx |
| Recommended Amp Power | 30-275 W |
| Frequency Response | 62 – 70 Hz – 20 kHz (depending on size) |
| Crossover | Proprietary |
| Impedance | 8 ohms (85″+ displays)
4 ohms (65″ and 75″ displays) |
| Sensitivity (db 1 watt/1 meter) | 92 |
| Mount | Pass-through flush wall or UM1 |
| Dimensions | Custom” L x 6.5” H x 2.38″ D |
| Standard Finish | High Gloss Black, Matte Black |
| SPECS DESCRIPTION | SPECS |
| System Design | Stereo soundbar
TW, WT (55″displays) WTW, WTW (65″+ displays) |
| Enclosure | Sealed |
| Woofer | (4) 5.25″ |
| Tweeter | (2) 1″ Dx |
| Recommended Amp Power | 30-275 W |
| Frequency Response | 62 – 70 Hz – 20 kHz (depending on size) |
| Crossover | Proprietary |
| Impedance | 8 ohms |
| Sensitivity (db 1 watt/1 meter) | 92 |
| Mount | Pass-through flush mount or UM1 |
| Dimensions | Custom” L x 6.5” H x 2.38″ D |
| Standard Finish | High Gloss Black, Matte Black |
1. Please keep your boxes and inner packaging materials. In the event that your speakers need to be serviced at the factory it is essential they are returned in their original packaging.
2. Break-in normally takes about 12 hours of playing. In this 12 hours, the crossover capacitors and drive units are breaking in. Please do not play at excessive power levels. Over-driving the speaker system can result in permanent damage. Always turn down the volume when changing between program sources.
Latest Press
