Description
Commercial Cinematic Performance from a Soundbar
As more feature films continue to come to streaming services, it is easier than ever to bring the full cinema experience home.
And while many of us are bringing larger and larger televisions into our Family Room, not everyone wants to have larger format in-walls or tower speakers. Traditionally, soundbars have always represented an integrated and minimalistic way of introducing enhanced sound into a space, but lacked the dynamics associated with a true cinematic experience, until now.
The Cinema Soundbar allows client to experience commercial grade cinematic sound from a custom integrated soundbar solution. Choose from a wide variety of designer grilles and finishes to complement any décor.
FEATURES
- High-output Cinematic Performance
- WTW, WTW, WTW (LCR) Configuration
- WTW, WTW (Stereo) Configuration
- 4×4 compression horn system
- Proprietary crossover design
- Precision CNC Construction
- Custom″ wide x 5.75″ deep x 7.5″ high
- Available for display sizes starting at 75″ up to 100″ or greater
- Custom finishes, designer grille fabrics, and colors available upon request
| System Type and Configuration | (3) Sector LCR, Sealed, WTW, WTW, WTW / Stereo WTW, WTW |
| Woofers | (6) 6.5″ Drivers (LCR)/ (4) 6.5″ Drivers (Stereo) |
| Tweeters | (3) 4×4 Compression Horn (LCR) / (2) 4×4 Compression Horn (Stereo) |
| Sensitivity / Max SPL | 93 dB at 1 W- 1 M / 104 dB at 1 W – 1 M |
| Impedance | 4 ohms each sector |
| Response | 45 Hz – 20 kHz |
| Power- Min/Max – RMS | 50 – 500 |
| Dimensions | Custom” wide x 5.75″ deep x 7.5″ high |
| Standard Finishes | High Gloss Black / Matte Black / Oak w/ Black Lacquer (up to 85″ displays) |
***Z-CLIP WALL MOUNT INSTALLATION ONLY DUE TO SIZE AND WEIGHT***
1. Please keep your boxes and inner packaging materials. In the event that your speakers need to be serviced at the factory it is essential they are returned in their original packaging.
2. If wall mounting the LCR, install rubber bumpers and Z Clips. Z Clips mount “tab down” (screws on the top) and “tab up” (screws on the bottom) on the wall. Do not mount the Z Clips where the non-safe zones are indicated on the back of the unit.
3. Install hookup wires. Observe polarity to and from the receiver amplifier to the speaker. (+) Side of the speaker must connect to the (+) side of the amplifier. I.e. red to + and black to (-). Place either directly above or below the display.
4. Break-in normally takes about 12 hours of playing. In this 12 hours, the crossover capacitors and drive units are breaking in. Please do not play at excessive power levels. Over-driving the speaker system can result in permanent damage. Always turn down the volume when changing between program sources.
